Craftsman Air CAPTIVE AIR 390-291352 Compressor Manual

The Craftsman Air CAPTIVE AIR 390-291352 is a powerful air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance of the compressor.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: High-efficiency motor, durable tank, pressure gauge, quick-connect fittings, and safety relief valve.

Feature	Description
High-efficiency motor	Provides reliable power for various tasks
Durable tank	Holds air pressure for extended use
Pressure gauge	Displays current air pressure
Quick-connect fittings	Allows easy attachment of air tools
Safety relief valve	Prevents over-pressurization

Installation

Unpack and inspect the compressor. Place it on a stable surface away from flammable materials.

Connect the air hose to the compressor's quick-connect fitting.
Ensure the compressor is plugged into a grounded outlet.
Check that the safety relief valve is functioning properly.

WARNING! Ensure proper ventilation during operation to avoid overheating.

First-Time Setup

Power on the compressor and set the desired pressure using the pressure regulator.

Adjust the pressure to the required level for your application.
Test the compressor by connecting an air tool and ensuring proper operation.

CAUTION! Do not exceed the maximum pressure rating of the compressor.

Specifications

Model: CAPTIVE AIR 390-291352
Tank Capacity: 6 gallons
Max Pressure: 125 PSI
Motor Power: 1.5 HP
Weight: 50 lbs
Dimensions: 24 x 18 x 18 inches
Power Source: 120V AC

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel of the compressor.

Controls: On/Off switch, pressure regulator, and safety relief valve.

Connecting Devices

Ensure the compressor is off before connecting any air tools.

Attach the air hose to the compressor's quick-connect fitting.
Connect the other end of the hose to your air tool.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Follow the steps to operate the compressor safely and effectively.

Turn on the compressor using the on/off switch.
Adjust the pressure to the desired level for your application.
Monitor the pressure gauge during operation.
Turn off the compressor when finished.

WARNING! Do not operate the compressor in wet conditions.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Check oil levels and change as needed.
Drain the tank regularly to remove moisture.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check outlet and power cord.
No air pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and fittings.
Pressure gauge not working	Faulty gauge	Replace pressure gauge if necessary.

Service: For assistance, contact customer support at 1-800-555-0199.