Craftsman Air 919-724570 Compressor Manual

The Craftsman Air 919-724570 is a reliable air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick connect air outlet, and easy-to-read pressure gauge.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Offers a good balance between portability and air supply.
150 PSI maximum pressure	Suitable for a variety of applications.
Quick connect air outlet	Allows for easy attachment of air tools.
Pressure gauge	Displays current tank pressure for monitoring.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick connect outlet.
Ensure the drain valve is closed before operation.
Plug the compressor into a grounded outlet.

WARNING! Always ensure the compressor is turned off and unplugged before making any adjustments.

First-Time Setup

Power on the compressor and allow it to build pressure before using any air tools.

Set the desired pressure using the regulator knob.
Check for any air leaks before starting your project.
Ensure all connections are secure.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Weight: Approximately 30 lbs.
Dimensions: 24 x 18 x 18 inches.
Noise Level: 68 dBA.

Controls and Settings

The compressor features a pressure regulator, on/off switch, and a quick connect fitting for easy tool attachment.

Regulator: Adjusts the output pressure for your tools.

On/Off Switch: Controls the power to the compressor.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Attach the air hose to the quick connect fitting.
Connect your air tool to the other end of the hose.
Turn on the compressor and set the desired pressure.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

To operate the compressor, turn on the power switch and allow it to build pressure. Use the regulator to adjust the output pressure as needed.

Monitor the pressure gauge during operation.
Turn off the compressor when finished using.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
Low pressure	Leak in hose or fittings	Inspect and replace damaged components.
Excessive noise	Loose parts	Tighten any loose screws or fittings.
Tank won't fill	Faulty pressure switch	Replace the pressure switch if necessary.

Reset: Unplug the compressor for 10 seconds and plug it back in.