Craftsman Air 919-72413 Compressor Manual

The Craftsman Air 919-72413 is a powerful air compressor designed for a variety of tasks, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance to ensure optimal performance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick coupler, and easy-to-read pressure gauges.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various tasks.
150 PSI maximum pressure	Delivers high pressure for efficient tool operation.
Quick coupler	Allows for easy connection of air hoses.
Pressure gauges	Displays tank and outlet pressure for monitoring.

Installation

Unpack and inspect the compressor. Place it on a stable surface away from flammable materials.

Connect the air hose to the quick coupler.
Ensure the drain valve is closed before starting.
Plug the compressor into a grounded outlet.
Turn on the power switch to start the compressor.

WARNING! Always ensure the compressor is on a flat surface to prevent tipping.

First-Time Setup

Before using the compressor for the first time, follow these steps:

Check all connections for leaks.
Set the desired pressure using the regulator.
Run the compressor until it reaches the cut-off pressure.
Test the operation with a pneumatic tool.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Weight: 50 lbs.
Dimensions: 24 x 18 x 18 inches.
Noise Level: 68 dBA.
Air Delivery: 2.6 CFM at 90 PSI.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge indicates the current tank pressure.

Tip: Always adjust the pressure before connecting tools.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Attach the air hose to the quick coupler.
Connect your pneumatic tool to the other end of the hose.
Turn on the compressor and set the desired pressure.

Tip: Use appropriate fittings to prevent air leaks.

Operating the Compressor

To operate the compressor:

Turn on the power switch.
Allow the compressor to build pressure.
Use the air as needed for your tools.
Monitor the pressure gauge during operation.

WARNING! Do not operate the compressor in wet conditions.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Drain the tank after each use to prevent rust.
Check and replace the air filter as needed.
Inspect hoses and fittings for wear.
Store in a dry place when not in use.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check outlet and power cord.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and fittings.
Tank won't fill	Faulty pressure switch	Replace pressure switch if necessary.

Service: For further assistance, contact customer support at 1-800-4-CRAFTSMAN.