Craftsman Air 919-724110 Compressor Manual

The Craftsman Air 919-724110 is a reliable air compressor designed for various tasks including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick connect coupler, and easy-to-read pressure gauges.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various tasks.
150 PSI maximum pressure	Delivers high pressure for demanding applications.
Quick connect coupler	Allows for easy attachment of air hoses and tools.
Pressure gauges	Displays tank and outlet pressure for monitoring.

Installation

Unpack and inspect the compressor. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick connect coupler.
Ensure the drain valve is closed before operation.
Plug the compressor into a grounded outlet.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and set the desired pressure using the regulator.

Adjust the pressure to the required level for your task.
Check for any air leaks before use.
Test the compressor by running it briefly.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Compressor Type: Oil-free.
Weight: 30 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and gauges located on the front panel. The on/off switch is also easily accessible.

Note: Always check the pressure before using any pneumatic tools.

Connecting Devices

Use the quick connect coupler to attach air hoses or tools.

Ensure the compressor is off before connecting devices.
Match the hose fittings to the coupler.
Turn on the compressor and adjust the pressure as needed.

Tip: Always disconnect tools when not in use.

Operating the Compressor

Follow the instructions for using the compressor with various tools.

Turn on the compressor and allow it to build pressure.
Use the air tools as needed, monitoring the pressure gauge.
Turn off the compressor when finished.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear or damage.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Wear appropriate personal protective equipment.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten any loose screws or components.
Tank won't fill	Faulty pressure switch	Replace the pressure switch if necessary.

Service: For further assistance, contact Craftsman customer service.