Craftsman Air 919-722010 Compressor Manual

The Craftsman Air 919-722010 is a powerful air compressor designed for various applications including inflating tires, powering pneumatic tools, and more. This manual provides essential information regarding safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick connect coupler, and built-in pressure gauge.

Feature	Description
Oil-free pump	Requires no oil changes, reducing maintenance.
6-gallon tank	Provides ample air storage for various tasks.
150 PSI maximum pressure	Delivers high pressure for efficient tool operation.
Quick connect coupler	Allows for easy attachment of air hoses and tools.
Built-in pressure gauge	Monitors air pressure for optimal performance.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick connect coupler.
Ensure the drain valve is closed before operation.
Plug the compressor into a grounded outlet.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and set the desired pressure using the regulator.

Check that the tank is empty before first use.
Adjust the pressure regulator to the required PSI for your application.
Test the compressor by connecting a tool and activating it.

CAUTION! Do not exceed the maximum pressure rating of the compressor.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Compressor Type: Oil-free.
Weight: 40 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Safety Features: Automatic shut-off at maximum pressure, thermal overload protection.

Connecting Devices

Ensure the compressor is off before connecting any tools.

Attach the air hose to the quick connect coupler.
Connect your pneumatic tool to the other end of the air hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks in the hose and connections before use.

Operating the Compressor

To operate the compressor, turn on the power switch and allow the tank to fill to the set pressure.

Monitor the pressure gauge during operation.
Use the compressor for your intended application.
Turn off the compressor when finished and release any remaining air.

WARNING! Do not operate the compressor in enclosed spaces without proper ventilation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Compressor runs continuously	Faulty pressure switch	Replace the pressure switch.
Unusual noise	Loose parts	Tighten any loose screws or bolts.

Reset: Disconnect power and reconnect to reset the compressor.