Craftsman Air 919-195410 Compressor Manual

The Craftsman Air 919-195410 is a reliable air compressor designed for various tasks, including inflating tires, powering pneumatic tools, and more. It features a powerful motor, a durable tank, and easy-to-use controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, quick-connect coupler, pressure gauge, and safety valve.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various tasks.
Quick-connect coupler	Allows for easy attachment of air hoses and tools.
Pressure gauge	Displays current tank pressure for monitoring.
Safety valve	Prevents over-pressurization for safe operation.

Installation

Unpack and inspect contents. Place the compressor on a stable surface.

Connect the air hose: Attach the hose to the quick-connect coupler.
Plug into AC power: Ensure the voltage matches the compressor requirements.
Check oil level: Ensure the oil level is adequate if applicable.

WARNING! Ensure all connections are secure before operating.

First-Time Setup

Power on the compressor; follow the setup instructions.

Set the desired pressure: Use the pressure regulator to adjust.
Check for leaks: Inspect all connections for air leaks.
Test operation: Run the compressor briefly to ensure functionality.

CAUTION! Ensure stable surface; avoid operating in wet conditions.

Specifications

Tank Size: 6 gallons.
Max Pressure: 125 PSI.
Motor Power: 1.5 HP.
Weight: 40 lbs.
Dimensions: 24 x 18 x 18 inches.
Noise Level: 68 dBA.
Power Source: 120V AC.

Controls and Settings

Access controls on the front panel: Power switch, pressure regulator, and pressure gauge.

Operation: Turn on the power switch, set the desired pressure, and connect your tools.

Connecting Devices

Connect air tools using the quick-connect coupler.

Ensure the compressor is off before connecting tools.
Match the tool's air inlet to the hose connector.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Follow these steps to operate the compressor safely.

Power on the compressor.
Set the desired pressure using the regulator.
Connect your air tool and begin operation.
Monitor the pressure gauge during use.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Keep the compressor in a dry location.
Do not operate in wet conditions.
Wear appropriate safety gear when using air tools.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Noisy operation	Loose parts	Tighten all screws and bolts.
Overheating	Blocked air intake	Clean air intake and ensure proper ventilation.

Reset: Follow the manufacturer's instructions for resetting if necessary.

Service: For support, contact Craftsman customer service.