Craftsman Air 919-195400 Compressor Manual

The Craftsman Air 919-195400 is a reliable air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and troubleshooting to ensure optimal performance and longevity of your compressor.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, quick-connect air outlet, pressure gauge, and safety valve.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various tasks.
Quick-connect air outlet	Allows for easy connection of air tools.
Pressure gauge	Displays current tank pressure for monitoring.
Safety valve	Prevents over-pressurization of the tank.

Installation

Unpack the compressor and place it on a stable surface. Ensure adequate ventilation during operation.

Connect the air hose to the quick-connect outlet.
Ensure the pressure regulator is set to the desired level.
Plug the compressor into a grounded outlet.
Turn on the compressor and allow it to build pressure.

WARNING! Ensure the compressor is on a flat surface to prevent tipping.

First-Time Setup

Before using the compressor, ensure all connections are secure and the tank is filled with air.

Check the oil level (if applicable) and fill as necessary.
Set the pressure regulator to the desired PSI for your application.
Test the compressor by running it briefly to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Tank Size: 6 gallons.
Max Pressure: 125 PSI.
Power Source: 120V AC.
Weight: 40 lbs.
Dimensions: 24 x 18 x 18 inches.
Noise Level: 68 dBA.
Air Delivery: 2.6 CFM at 90 PSI.

Controls and Settings

The compressor features an easy-to-use control panel with an on/off switch, pressure regulator, and pressure gauge.

Pressure Regulator: Adjusts the output pressure to your tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Connect your air tools using the quick-connect outlet. Ensure the compressor is off before making connections.

Turn off the compressor.
Attach the air hose to the quick-connect outlet.
Connect your air tool to the other end of the hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks in the connections before use.

Operating the Compressor

To operate the compressor, follow these steps:

Ensure the tank is filled with air.
Connect your air tool and set the desired pressure.
Turn on the compressor and allow it to build pressure.
Use your air tool as needed.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for the longevity of your compressor.

Check and replace the air filter as needed.
Drain the tank regularly to prevent moisture buildup.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Always wear appropriate personal protective equipment.

WARNING! Do not exceed the maximum pressure rating of the compressor.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Compressor runs continuously	Faulty pressure switch	Replace pressure switch.
Excessive noise	Loose components	Tighten all screws and bolts.

Service: For further assistance, contact customer support.