Craftsman Air 919-174410 Compressor Manual

The Craftsman Air 919-174410 is a reliable air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and troubleshooting to ensure optimal performance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, quick-connect air outlet, pressure gauge, and safety valve.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various tasks.
Quick-connect air outlet	Allows for easy attachment of air hoses and tools.
Pressure gauge	Displays the current air pressure in the tank.
Safety valve	Prevents over-pressurization of the tank.

Installation

Unpack the compressor and place it on a stable, level surface. Ensure adequate ventilation around the unit.

Connect the air hose to the quick-connect outlet.
Plug the compressor into a grounded electrical outlet.
Check that the safety valve is functioning properly.
Fill the tank with air by turning on the compressor.

WARNING! Ensure the compressor is unplugged during setup to avoid accidental start-up.

First-Time Setup

Power on the compressor and allow it to build pressure. Follow the instructions for setting the desired pressure levels.

Adjust the pressure regulator to the desired PSI.
Check for any air leaks in the connections.
Test the compressor with a pneumatic tool to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating of the compressor.

Specifications

Model: Craftsman Air 919-174410.
Tank Capacity: 6 gallons.
Max Pressure: 150 PSI.
Power Source: 120V AC.
Weight: 40 lbs.
Dimensions: 24 x 18 x 18 inches.
Noise Level: 68 dB.

Controls and Settings

The compressor features a pressure regulator, on/off switch, and pressure gauge for easy operation.

Pressure Regulator: Adjusts the output pressure for different tools.

On/Off Switch: Powers the compressor on and off.

Pressure Gauge: Displays the current tank pressure.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Attach the air hose to the quick-connect outlet.
Connect the other end of the hose to the pneumatic tool.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks before using the compressor.

Operating the Compressor

To operate the compressor, follow these steps:

Turn on the compressor using the on/off switch.
Allow the tank to fill to the desired pressure.
Use the pressure regulator to set the output pressure.
Connect your pneumatic tool and begin operation.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Check the air filter regularly and clean or replace as needed.
Drain the tank of moisture after each use.
Inspect hoses and connections for wear and tear.

Safety Information

Always follow safety guidelines when operating the compressor.

Wear appropriate safety gear, including goggles and gloves.
Do not exceed the maximum pressure rating.
Keep the compressor in a well-ventilated area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
No air output	Blocked air filter	Clean or replace air filter.
Excessive noise	Loose components	Tighten all screws and connections.

Reset: If issues persist, refer to the service manual or contact support.

Service: For assistance, contact Craftsman customer service.