Craftsman Air 919-174310 Compressor Manual

The Craftsman Air 919-174310 is a reliable air compressor designed for various tasks, including inflating tires, powering pneumatic tools, and more. It features a powerful motor, a durable tank, and easy-to-use controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, and easy-to-read pressure gauge.

Feature	Description
6-Gallon Tank	Provides ample air storage for various tasks
150 PSI Maximum Pressure	Delivers high pressure for efficient operation
Oil-Free Pump	Requires less maintenance and provides cleaner air
Easy-to-Read Pressure Gauge	Allows for accurate monitoring of air pressure
Portable Design	Equipped with wheels for easy transportation

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the compressor outlet.
Ensure the power cord is plugged into a grounded outlet.
Check that all connections are secure before operating.

WARNING! Always operate in a dry environment to avoid electrical hazards.

First-Time Setup

Power on the compressor and allow it to build pressure before use.

Set the desired pressure using the regulator.
Check for any air leaks in the connections.
Test the compressor by running it briefly.

CAUTION! Ensure the area is clear of obstructions before operating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Motor: 1.5 HP, 120V.
Weight: 50 lbs.
Dimensions: 24 x 18 x 18 inches.
Noise Level: 68 dBA.
Air Delivery: 2.6 CFM at 90 PSI.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Safety Features: Automatic shut-off when maximum pressure is reached.

Connecting Devices

Connect pneumatic tools using the air hose to the compressor outlet.

Ensure the compressor is turned off before connecting.
Match the hose fittings to the tool being used.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check the tool's pressure requirements before use.

Operating the Compressor

To operate, turn on the compressor and allow it to reach the desired pressure before using any connected tools.

Monitor the pressure gauge during operation.
Adjust the regulator as needed for different tools.
Turn off the compressor when finished and disconnect the tools.

WARNING! Do not exceed the maximum pressure rating of the compressor.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Always wear appropriate safety gear.

WARNING! Keep the compressor away from flammable materials and ensure proper ventilation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
No pressure build-up	Leak in the system	Inspect for leaks and tighten connections.
Excessive noise	Loose parts	Tighten any loose screws or fittings.
Pressure gauge not working	Faulty gauge	Replace the pressure gauge if necessary.

Reset: Disconnect power and reconnect to reset the compressor.

Service: For assistance, contact Craftsman support at 1-800-4-Craftsman.