Craftsman Air 919-168700 Compressor Manual

The Craftsman Air 919-168700 is a reliable air compressor designed for a variety of tasks, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick-connect coupler, and built-in pressure gauge.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various tasks.
150 PSI maximum pressure	Delivers high pressure for demanding applications.
Quick-connect coupler	Allows for easy attachment of air hoses and tools.
Built-in pressure gauge	Monitors air pressure for optimal performance.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick-connect coupler.
Ensure the drain valve is closed before operation.
Plug the compressor into a grounded outlet.

WARNING! Always ensure the compressor is on a flat surface to prevent tipping.

First-Time Setup

Power on the compressor and set the desired pressure using the regulator.

Adjust the pressure to the required level for your task.
Check all connections for leaks before use.
Test the compressor by running it briefly to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Compressor Type: Oil-free.
Weight: Approximately 40 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

The compressor features an easy-to-use control panel with an on/off switch, pressure regulator, and pressure gauge.

Adjust the pressure using the regulator knob to suit your needs.

Connecting Devices

Connect your pneumatic tools using the quick-connect coupler.

Ensure the compressor is off before connecting tools.
Match the tool's air inlet to the coupler.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

To operate the compressor, follow these steps:

Turn on the compressor using the power switch.
Adjust the pressure to the desired level.
Connect your tool and start using it.

WARNING! Do not operate the compressor in wet conditions.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
Low pressure	Leak in the system	Inspect hoses and connections for leaks.
Compressor runs continuously	Faulty pressure switch	Replace the pressure switch.
Excessive noise	Loose components	Tighten all screws and bolts.

Service: For further assistance, contact customer support.