Craftsman Air 919-167800 Compressor Manual

The Craftsman Air 919-167800 is a reliable air compressor designed for both home and professional use. It features a powerful motor, a durable tank, and various safety features to ensure efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, and quick-connect couplers.

Feature	Description
6-Gallon Tank	Provides ample air storage for various tasks
150 PSI Maximum Pressure	Delivers high pressure for demanding applications
Oil-Free Pump	Requires less maintenance and provides clean air
Quick-Connect Couplers	Allows for easy attachment of air tools
Portable Design	Wheels and handle for easy transportation

Installation

Unpack and inspect contents. Place on a stable surface.

Connect the air hose: Ensure the compressor is off before connecting.
Plug into a power outlet: Use a grounded outlet for safety.
Check for leaks: After setup, check all connections for air leaks.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and set the desired pressure.

Adjust the pressure regulator: Turn the knob to set the desired PSI.
Test the compressor: Run the compressor to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Motor: 1.5 HP.
Weight: 40 lbs.
Power Source: 120V AC.
Noise Level: 68 dBA.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel.

Pressure Regulator: Adjusts the output pressure for air tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Connect air tools using the quick-connect couplers.

Ensure the compressor is off before connecting tools.
Match the coupler to the tool's connector.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting tools.

Operating the Compressor

Follow these steps to operate the compressor safely.

Turn on the compressor using the on/off switch.
Adjust the pressure regulator to the desired setting.
Connect your air tool and begin operation.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Check the oil level regularly (if applicable).
Drain the tank to remove moisture after each use.
Inspect hoses and connections for wear and tear.

Safety Information

Read all safety instructions before operating the compressor.

Always wear safety goggles when using air tools.
Keep the compressor away from flammable materials.
Do not exceed the maximum pressure rating.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	No power	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and bolts.
Tank won't fill	Faulty pressure switch	Replace pressure switch if necessary.

Service: For assistance, contact Craftsman customer support.