Craftsman Air 919-167784 Compressor Manual

The Craftsman Air 919-167784 is a powerful air compressor designed for various tasks, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick-connect coupler, and easy-to-read pressure gauge.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various tasks.
150 PSI maximum pressure	Delivers high pressure for efficient operation.
Quick-connect coupler	Allows for easy attachment of air hoses and tools.
Pressure gauge	Displays current tank pressure for monitoring.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick-connect coupler.
Ensure the drain valve is closed before operation.
Plug the compressor into a grounded outlet.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and set the desired pressure using the regulator.

Check the oil level (if applicable) and fill if necessary.
Set the pressure regulator to the desired PSI for your task.
Test the compressor by running it briefly to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating of the compressor.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Compressor Type: Oil-free.
Weight: Approximately 40 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge indicates the current tank pressure.

Note: Always adjust the pressure before connecting tools.

Connecting Devices

Use the quick-connect coupler to attach air hoses and pneumatic tools.

Ensure the compressor is off before connecting devices.
Match the hose fittings to the coupler.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

To operate the compressor, turn on the power switch and allow it to build pressure.

Monitor the pressure gauge during operation.
Use the regulator to adjust the pressure for your specific task.
Turn off the compressor when finished and unplug it.

WARNING! Do not operate the compressor in wet conditions.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check the air filter regularly and replace if necessary.
Store the compressor in a dry place when not in use.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
No pressure	Leak in the system	Inspect hoses and connections for leaks.
Excessive noise	Loose parts	Tighten any loose screws or components.
Pressure won't build	Faulty pressure switch	Replace the pressure switch if necessary.

Service: For further assistance, contact Craftsman customer service.