Craftsman Air 919-167700 Compressor Manual

The Craftsman Air 919-167700 is a reliable air compressor designed for various tasks, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Troubleshooting

Features at a Glance

Key features include: oil-free pump, portable design, easy-to-read pressure gauge, and multiple outlet ports for various applications.

Feature	Description
Oil-Free Pump	Requires no maintenance and provides clean air.
Portable Design	Lightweight and easy to transport.
Pressure Gauge	Allows for easy monitoring of air pressure.
Multiple Outlets	Can power multiple tools simultaneously.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface away from flammable materials.

Connect the air hose to the outlet port.
Ensure the compressor is plugged into a grounded outlet.
Check the oil level if applicable.
Turn on the compressor and allow it to build pressure.

WARNING! Always operate in a well-ventilated area and avoid inhaling compressor exhaust.

First-Time Setup

Before using the compressor for the first time, ensure all connections are secure and the unit is properly set up.

Read the safety instructions carefully.
Check all components for proper assembly.
Test the pressure gauge for accuracy.
Run the compressor briefly to ensure it operates correctly.

CAUTION! Do not exceed the maximum pressure rating of the compressor.

Specifications

Model: Craftsman Air 919-167700
Power Source: Electric
Max Pressure: 150 PSI
Tank Size: 6 gallons
Weight: 30 lbs
Dimensions: 24 x 12 x 20 inches
Noise Level: 68 dB

Controls and Settings

The compressor features an easy-to-use control panel with an on/off switch, pressure regulator, and quick-connect fittings for air hoses.

Pressure Regulator: Adjusts the output pressure for different applications.

Connecting Devices

Ensure the compressor is off before connecting any devices. Use appropriate fittings for your air tools.

Attach the air hose to the compressor outlet.
Connect your air tool to the other end of the hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

To operate the compressor, follow these steps:

Turn on the compressor using the power switch.
Allow the compressor to reach the desired pressure.
Use the connected air tool as needed.
Turn off the compressor when finished.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Check and replace the air filter as needed.
Drain the tank regularly to prevent moisture buildup.
Inspect hoses and fittings for wear and tear.
Store the compressor in a dry place when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the power cord and outlet.
No pressure	Leak in the system	Inspect hoses and fittings for leaks.
Excessive noise	Loose components	Tighten any loose screws or fittings.
Overheating	Blocked air intake	Clean the air intake filter.

Reset: If the compressor has a reset button, press it to reset the system.