Craftsman Air 919-167630 Compressor Manual

The Craftsman Air 919-167630 is a versatile air compressor designed for a variety of tasks, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick coupler, and pressure gauge.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various tasks.
150 PSI maximum pressure	Suitable for a wide range of applications.
Quick coupler	Allows for easy connection of air tools.
Pressure gauge	Monitors air pressure for optimal performance.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick coupler.
Ensure the drain valve is closed before operation.
Plug the compressor into a grounded outlet.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and set the desired pressure using the regulator.

Adjust the pressure to the required level for your task.
Check for any air leaks before use.
Test the compressor by running it briefly.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Model: Craftsman Air 919-167630.
Tank Capacity: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Weight: Approximately 40 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel.

Pressure Regulator: Adjusts the output pressure for connected tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Connect air tools using the quick coupler.

Ensure the compressor is off before connecting tools.
Match the tool's connector to the quick coupler.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Use the compressor for various tasks such as inflating tires, powering nail guns, and more.

Set the desired pressure for your task.
Turn on the compressor and allow it to build pressure.
Use the connected tool as needed.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Check and drain the tank regularly to prevent moisture buildup.
Inspect the air filter and replace if necessary.
Store the compressor in a dry place when not in use.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power source issue	Check the outlet and power cord.
No air output	Blocked hose	Inspect and clear any blockages.
Pressure drops quickly	Leak in the system	Check for leaks and repair as needed.
Unusual noise	Loose components	Tighten any loose parts and inspect for damage.

Service: For further assistance, contact Craftsman customer support.