Craftsman Air 919-167610 Compressor Manual

The Craftsman Air 919-167610 is a reliable air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick coupler, and easy-to-read pressure gauge.

Feature	Description
Oil-free pump	Requires no maintenance and provides cleaner air.
6-gallon tank	Provides ample air storage for various tasks.
150 PSI maximum pressure	Delivers high pressure for efficient operation.
Quick coupler	Allows for easy attachment of air hoses and tools.
Pressure gauge	Displays current tank pressure for monitoring.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick coupler.
Ensure the drain valve is closed before operation.
Plug the compressor into a grounded outlet.

WARNING! Ensure the compressor is on a flat surface to prevent tipping.

First-Time Setup

Power on the compressor and set the desired pressure using the regulator.

Check the oil level if applicable (this model is oil-free).
Adjust the pressure to the required level for your task.
Test the compressor by running it briefly to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Compressor Type: Oil-free.
Weight: Approximately 40 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge indicates the current tank pressure.

Safety Features: Automatic shut-off when the tank reaches maximum pressure.

Connecting Devices

Use the quick coupler to connect air tools or hoses.

Ensure the compressor is off before connecting devices.
Match the tool's air inlet to the hose fitting.
Turn on the compressor to begin operation.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

To operate, turn on the compressor and adjust the pressure as needed for your application.

Monitor the pressure gauge during use.
Turn off the compressor when finished and unplug it.

WARNING! Do not operate in enclosed spaces without proper ventilation.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check for leaks and tighten connections as needed.
Store in a dry place when not in use.

CAUTION! Always unplug before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Wear appropriate personal protective equipment.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check outlet and power cord.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and bolts.
Tank won't fill	Faulty pressure switch	Replace pressure switch if necessary.

Service: For further assistance, contact customer service.