Craftsman Air 919-167600 Compressor Manual

The Craftsman Air 919-167600 is a reliable air compressor designed for various tasks, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick-connect coupler, and built-in pressure gauge.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various tasks.
150 PSI maximum pressure	Suitable for a wide range of applications.
Quick-connect coupler	Allows for easy attachment of air hoses and tools.
Built-in pressure gauge	Monitors air pressure for optimal performance.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick-connect coupler.
Ensure the drain valve is closed before operation.
Plug the compressor into a grounded outlet.
Turn on the compressor using the power switch.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Before using the compressor for the first time, follow these steps:

Check the oil level (if applicable) and fill as necessary.
Set the desired pressure using the regulator.
Test the compressor by connecting a tool and turning it on.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Model: Craftsman Air 919-167600
Tank Size: 6 gallons
Max Pressure: 150 PSI
Power Source: 120V AC
Weight: Approximately 40 lbs
Dimensions: 24 x 18 x 18 inches
Noise Level: 68 dBA

Controls and Settings

The compressor features a power switch, pressure regulator, and quick-connect coupler for easy operation.

Pressure Regulator: Adjusts the output pressure for different tools.

Power Switch: Turns the compressor on and off.

Connecting Devices

To connect devices, ensure the compressor is off and follow these steps:

Attach the air hose to the quick-connect coupler.
Connect the other end of the hose to your pneumatic tool.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks before use.

Operating the Compressor

To operate the compressor:

Turn on the power switch.
Allow the compressor to build pressure.
Use the connected tool as needed.
Turn off the compressor when finished.

WARNING! Do not operate the compressor in wet conditions.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Drain the tank after each use to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and fittings.
Compressor cycles too frequently	Improper pressure setting	Adjust the pressure regulator.

Service: For further assistance, contact customer support.