Craftsman Air 919-167460 Compressor Manual

The Craftsman Air 919-167460 is a reliable air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. It features a powerful motor, a large tank capacity, and easy-to-use controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, and easy-to-read pressure gauge.

Feature	Description
6-Gallon Tank	Provides ample air storage for various tasks.
150 PSI Maximum Pressure	Allows for efficient operation of pneumatic tools.
Oil-Free Pump	Requires less maintenance and provides cleaner air.
Easy-to-Read Pressure Gauge	Helps monitor air pressure easily.
Portable Design	Equipped with wheels for easy transportation.

Installation

Unpack and inspect the compressor. Place it on a stable surface away from moisture.

Connect the air hose: Ensure the compressor is off before connecting.
Plug into a grounded outlet: Use a dedicated circuit for best performance.
Check for leaks: Turn on the compressor and inspect connections.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor; follow the setup instructions provided.

Set the desired pressure: Use the pressure regulator to adjust.
Test the compressor: Run it briefly to ensure proper operation.
Check all connections: Ensure everything is secure before use.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Motor: 1.5 HP, oil-free.
Weight: 50 lbs.
Dimensions: 24 x 18 x 18 inches.
Power Source: 120V AC.
Operating Temperature: 32°F to 104°F.

Controls and Settings

Access controls on the front panel: pressure regulator, on/off switch, and quick-connect coupler.

Pressure Regulator: Adjusts the output pressure for tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Connect air tools using the quick-connect coupler.

Ensure the compressor is off before connecting.
Match the tool's connector to the coupler.
Turn on the compressor and set the desired pressure.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Follow these steps to operate the compressor safely.

Turn on the compressor using the on/off switch.
Adjust the pressure regulator to the desired level.
Connect your air tool and begin operation.
Monitor the pressure gauge during use.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check the air filter regularly and replace if necessary.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Do not operate in wet conditions.
Keep the compressor away from flammable materials.
Use personal protective equipment when necessary.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
Low pressure	Leak in the system	Inspect hoses and connections for leaks.
Excessive noise	Loose parts	Tighten any loose screws or components.
Overheating	Blocked air intake	Ensure the air intake is clear of obstructions.

Reset: Unplug and plug back in to reset the compressor.