Craftsman Air 919-167362 Compressor Manual

The Craftsman Air 919-167362 is a reliable air compressor designed for various tasks, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and troubleshooting to ensure optimal performance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick-connect coupler, and built-in pressure gauge.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Offers a good balance of portability and air storage.
150 PSI maximum pressure	Suitable for a variety of applications.
Quick-connect coupler	Allows for easy attachment of air hoses.
Built-in pressure gauge	Monitors air pressure for optimal performance.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick-connect coupler.
Ensure the drain valve is closed before starting.
Plug the compressor into a grounded outlet.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and set the desired pressure using the regulator.

Adjust the pressure to the required level for your application.
Check for any air leaks before use.
Test the compressor with a small task to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Compressor Type: Oil-free.
Weight: Approximately 40 lbs.
Noise Level: 68 dBA.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Tip: Always check the pressure gauge before starting any task.

Connecting Devices

Ensure the compressor is off before connecting any tools or hoses.

Attach the air hose to the quick-connect coupler.
Connect the other end of the hose to your pneumatic tool.
Turn on the compressor and adjust the pressure as needed.

Tip: Use the appropriate fittings for your tools.

Operating the Compressor

To operate the compressor, turn on the power switch and allow it to build pressure. Monitor the pressure gauge during use.

Use the compressor for various tasks such as inflating tires or powering tools.
Turn off the compressor when finished and unplug it.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance and longevity.

Drain the tank after each use to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	No power	Check power source and connections.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and fittings.
Compressor cycles frequently	Improper pressure setting	Adjust pressure to recommended levels.

Service: For further assistance, contact customer support.