Craftsman Air 919-167360 Operators Compressor Manual

The Craftsman Air 919-167360 is a reliable air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance to ensure optimal performance and longevity of your compressor.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick-connect coupler, and easy-to-read pressure gauge.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Offers a good balance between portability and air supply.
150 PSI maximum pressure	Suitable for a variety of tasks.
Quick-connect coupler	Allows for easy attachment of air tools.
Pressure gauge	Displays current tank pressure for monitoring.

Installation

Unpack and inspect the compressor. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick-connect coupler.
Ensure the compressor is plugged into a grounded outlet.
Check that the pressure switch is set to the desired PSI.
Turn on the compressor using the power switch.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Before using the compressor, ensure all connections are secure and the tank is filled with air.

Set the desired pressure using the pressure regulator.
Connect your air tool to the quick-connect coupler.
Turn on the compressor and allow it to build pressure.
Once the desired pressure is reached, you can start using your air tool.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Model: Craftsman Air 919-167360
Tank Capacity: 6 gallons
Maximum Pressure: 150 PSI
Power Source: 120V AC
Weight: Approximately 30 lbs
Dimensions: 24 x 18 x 18 inches
Noise Level: 68 dBA

Controls and Settings

The compressor features a power switch, pressure regulator, and pressure gauge for easy operation.

Power Switch: Turns the compressor on and off.

Pressure Regulator: Adjusts the output pressure for connected tools.

Pressure Gauge: Displays the current tank pressure.

Connecting Devices

Ensure the compressor is off before connecting any air tools.

Attach the air hose to the quick-connect coupler.
Connect your air tool to the other end of the hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks in the hose and connections before use.

Operating the Compressor

To operate the compressor, follow these steps:

Turn on the power switch.
Allow the compressor to build pressure until it reaches the set PSI.
Use your air tool as needed, monitoring the pressure gauge.
Turn off the compressor when finished.

WARNING! Never operate the compressor in an enclosed space without proper ventilation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.
Store the compressor in a dry place when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check outlet and power cord.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and bolts.
Compressor cycles frequently	Improper pressure setting	Adjust pressure regulator.

Service: For further assistance, contact customer support.