Craftsman Air 919-167341 Compressor Manual

The Craftsman Air 919-167341 is a reliable air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, easy-to-read pressure gauges, and a lightweight design for portability.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Offers a good balance of portability and air storage.
150 PSI maximum pressure	Suitable for a variety of tasks.
Easy-to-read gauges	Allows for quick monitoring of pressure levels.
Portable design	Wheels and handle for easy transport.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface away from moisture.

Connect the air hose to the compressor outlet.
Ensure the pressure regulator is set to the desired PSI.
Plug the compressor into a grounded outlet.
Turn on the compressor and allow it to build pressure.

WARNING! Always operate in a well-ventilated area and avoid using near flammable materials.

First-Time Setup

Before using the compressor, ensure all connections are secure and the unit is properly set up.

Check the oil level (if applicable) and fill as needed.
Attach the air hose securely to the compressor.
Set the pressure regulator to the desired level.
Test the compressor with a low-pressure application first.

CAUTION! Do not exceed the maximum pressure rating of the compressor.

Specifications

Model: Craftsman Air 919-167341
Tank Size: 6 gallons
Maximum Pressure: 150 PSI
Power Source: 120V AC
Weight: Approximately 30 lbs
Dimensions: 24 x 18 x 18 inches
Noise Level: 68 dB

Controls and Settings

The compressor features an easy-to-use control panel with an on/off switch, pressure gauge, and regulator knob.

Pressure Gauge: Displays current tank pressure.

Regulator Knob: Adjusts the output pressure for connected tools.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Attach the air hose to the compressor outlet.
Connect the other end of the hose to the tool or device.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks in the hose and connections before use.

Operating the Compressor

To operate the compressor, follow these steps:

Turn on the compressor using the power switch.
Allow the compressor to build pressure to the set level.
Use the connected tool as needed.
Monitor the pressure gauge during operation.

WARNING! Do not operate the compressor in wet conditions.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Check and replace the air filter as needed.
Drain the tank regularly to prevent moisture buildup.
Inspect hoses and connections for wear and tear.
Store the compressor in a dry place when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
No pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and bolts.
Pressure drops	Faulty regulator	Replace the pressure regulator.

Reset: Unplug the unit for a few minutes and plug it back in.