Craftsman Air 919-167312 Compressor Manual

The Craftsman Air 919-167312 is a reliable air compressor designed for both home and professional use. It features a powerful motor, a large tank capacity, and various outlets for different air tools. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, and multiple air outlets.

Feature	Description
6-Gallon Tank	Provides a good amount of air for various tasks.
150 PSI Maximum Pressure	Suitable for powering a wide range of air tools.
Oil-Free Pump	Requires less maintenance and is easier to use.
Multiple Outlets	Allows for simultaneous use of multiple tools.
Portable Design	Easy to transport with a handle and wheels.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface away from moisture.

Connect the air hose to the outlet.
Ensure the compressor is plugged into a grounded outlet.
Check the oil level if applicable (for models that require oil).
Turn the power switch to the "On" position.

WARNING! Always use the compressor in a well-ventilated area to avoid overheating.

First-Time Setup

Before using the compressor for the first time, follow these steps:

Read the safety instructions carefully.
Check all connections for leaks.
Set the desired pressure using the regulator.
Test the compressor with a small air tool.

CAUTION! Ensure the area is clear of debris and obstacles before operation.

Specifications

Tank Capacity: 6 gallons.
Maximum Pressure: 150 PSI.
Motor: 1.5 HP.
Weight: 40 lbs.
Dimensions: 24 x 18 x 18 inches.
Power Source: 120V AC.
Noise Level: 68 dB.

Controls and Settings

The compressor features an easy-to-use control panel with an on/off switch, pressure gauge, and regulator.

Pressure Gauge: Displays the current pressure level.

Regulator: Adjusts the output pressure for connected tools.

Connecting Devices

To connect air tools, follow these steps:

Ensure the compressor is off.
Connect the air hose to the tool and the compressor outlet.
Turn on the compressor and set the desired pressure.
Test the tool for proper operation.

Tip: Always disconnect tools when not in use to prevent accidental operation.

Operating the Compressor

To operate the compressor:

Turn on the power switch.
Allow the compressor to build pressure until it reaches the set level.
Use the connected air tool as needed.
Monitor the pressure gauge during operation.

WARNING! Do not exceed the maximum pressure rating of the compressor or tools.

Maintenance

Regular maintenance is essential for optimal performance:

Check and replace the air filter as needed.
Drain the tank regularly to remove moisture.
Inspect hoses and connections for wear and tear.
Store in a dry place when not in use.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Follow these safety guidelines to ensure safe operation:

Read the manual before use.
Wear appropriate safety gear when operating tools.
Keep the compressor away from flammable materials.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Noisy operation	Loose parts	Tighten all screws and bolts.
Overheating	Blocked air intake	Clean the air intake filter.

Reset: If issues persist, consult a professional technician.