Craftsman Air 919-167311 Compressor Manual

The Craftsman Air 919-167311 is a reliable air compressor designed for various tasks, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick coupler, and pressure gauge.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various applications.
150 PSI maximum pressure	Delivers high pressure for efficient tool operation.
Quick coupler	Allows for easy connection and disconnection of air hoses.
Pressure gauge	Monitors air pressure for optimal performance.

Installation

Unpack and inspect the compressor. Place it on a stable, level surface away from flammable materials.

Connect the air hose to the quick coupler.
Ensure the drain valve is closed before starting.
Plug the compressor into a grounded outlet.

WARNING! Ensure proper ventilation during operation to avoid overheating.

First-Time Setup

Power on the compressor and set the desired pressure using the regulator.

Adjust the pressure to the required level for your application.
Check for any air leaks before use.
Test the compressor with a small task to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Compressor Type: Oil-free.
Weight: 50 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Tip: Always check the pressure gauge before using any pneumatic tools.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Attach the air hose to the quick coupler.
Connect your pneumatic tool to the other end of the hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Use only compatible tools to avoid damage.

Operating the Compressor

To operate the compressor, turn on the power switch and allow the tank to fill to the set pressure.

Monitor the pressure gauge during operation.
Use the compressor for your intended tasks.
Turn off the compressor when finished and unplug it.

WARNING! Do not operate the compressor in wet conditions.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the power cord and outlet.
Low pressure	Leak in the system	Inspect hoses and connections for leaks.
Unusual noise	Loose parts	Tighten any loose screws or components.
Overheating	Poor ventilation	Ensure the compressor is in a well-ventilated area.

Service: For further assistance, contact customer support.