Craftsman Air 919-167260 Compressor Manual

The Craftsman Air 919-167260 is a powerful air compressor designed for a variety of tasks including inflating tires, powering pneumatic tools, and more. It features a 6-gallon tank, a maximum pressure of 150 PSI, and a 2.6 SCFM at 90 PSI for efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, and easy-to-read pressure gauges.

Feature	Description
6-Gallon Tank	Provides ample air supply for various tasks
150 PSI Maximum Pressure	Allows for efficient operation of pneumatic tools
Oil-Free Pump	Requires less maintenance and provides clean air
Easy-to-Read Gauges	Helps monitor pressure levels easily
Portable Design	Wheels and handle for easy transport

Installation

Unpack and inspect the compressor. Place it on a stable surface away from flammable materials.

Connect the air hose: Ensure it is securely attached to the compressor outlet.
Plug into a grounded outlet: Use a power source that matches the compressor's voltage.
Check for leaks: Turn on the compressor and inspect connections.

WARNING! Always ensure the compressor is off and unplugged before making any adjustments.

First-Time Setup

Power on the compressor; follow the setup instructions.

Set the desired pressure: Use the pressure regulator to adjust.
Test the compressor: Run it briefly to ensure proper operation.
Check safety features: Ensure the safety valve is functioning correctly.

CAUTION! Ensure the area is well-ventilated during operation.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
SCFM at 90 PSI: 2.6 SCFM.
Power Source: 120V AC.
Weight: Approximately 50 lbs.
Dimensions: 24 x 18 x 18 inches.
Noise Level: 68 dBA.

Controls and Settings

Access the pressure settings via the regulator knob. The on/off switch is located on the side of the compressor.

Gauges: Monitor tank pressure and outlet pressure easily.

Connecting Devices

Connect air tools using the quick-connect coupler.

Ensure the compressor is off before connecting tools.
Match the tool's air inlet to the compressor outlet.
Turn on the compressor and adjust pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Follow these steps to operate the compressor safely.

Turn on the compressor using the on/off switch.
Adjust the pressure to the required level for your tool.
Monitor the gauges during operation.
Turn off the compressor when finished and unplug it.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Keep the compressor away from flammable materials.
Do not operate in wet conditions.
Always wear safety goggles when using pneumatic tools.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
No pressure	Leak in the system	Inspect hoses and connections for leaks.
Excessive noise	Loose parts	Tighten any loose screws or components.
Pressure drops	Faulty regulator	Replace the pressure regulator if necessary.

Service: For assistance, contact customer support at 1-800-4-MY-HOME.