Craftsman Air 919-167220 Compressor Manual

The Craftsman Air 919-167220 is a reliable air compressor designed for various tasks, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick connect coupler, and built-in pressure gauge.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various applications.
150 PSI maximum pressure	Delivers high pressure for efficient operation.
Quick connect coupler	Allows for easy attachment of air hoses and tools.
Built-in pressure gauge	Monitors air pressure for optimal performance.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick connect coupler.
Ensure the compressor is plugged into a grounded outlet.
Check that all connections are secure before powering on.

WARNING! Always operate the compressor in a dry environment to avoid electrical hazards.

First-Time Setup

Before using the compressor for the first time, follow these steps:

Fill the tank with air by turning on the compressor.
Set the desired pressure using the built-in regulator.
Test the compressor with a small tool to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Weight: Approximately 40 lbs.
Noise Level: 68 dBA.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

The compressor features a simple control panel with an on/off switch, pressure regulator, and pressure gauge for easy operation.

Safety Features: Automatic shut-off when the tank reaches maximum pressure.

Connecting Devices

To connect devices, ensure the compressor is off and follow these steps:

Attach the air hose to the quick connect coupler.
Connect your pneumatic tool to the other end of the hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks in the connections before use.

Operating the Compressor

To operate the compressor:

Turn on the compressor using the on/off switch.
Allow the tank to fill to the desired pressure.
Use your pneumatic tools as needed.

WARNING! Do not operate the compressor in enclosed spaces without proper ventilation.

Maintenance

Regular maintenance is essential for optimal performance:

Drain the tank regularly to remove moisture.
Check and replace air filters as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Noisy operation	Loose components	Tighten any loose screws or bolts.
Tank won't fill	Faulty pressure switch	Contact customer service for assistance.

Service: For support, contact 1-800-4-CRAFTSMAN or visit www.craftsman.com.