Craftsman Air 919-167211 Compressor Manual

The Craftsman Air 919-167211 is a reliable air compressor designed for various tasks including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick-connect coupler, and easy-to-read pressure gauges.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides a good balance between portability and air supply.
150 PSI maximum pressure	Suitable for a variety of applications.
Quick-connect coupler	Allows for easy attachment of air hoses and tools.
Pressure gauges	Displays tank and outlet pressure for monitoring.

Installation

Unpack the compressor and place it on a stable surface. Ensure adequate ventilation around the unit.

Connect the air hose to the quick-connect coupler.
Plug the compressor into a grounded outlet.
Check all connections for leaks before starting.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Before using the compressor for the first time, follow these steps:

Fill the tank with air by turning on the compressor.
Set the desired pressure using the regulator.
Test the compressor with a small task to ensure functionality.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Model: Craftsman Air 919-167211.
Tank Size: 6 gallons.
Max Pressure: 150 PSI.
Power Source: 120V AC.
Weight: Approximately 30 lbs.
Dimensions: 24 x 18 x 18 inches.
Noise Level: 68 dBA.

Controls and Settings

The compressor features an easy-to-use control panel with an on/off switch, pressure regulator, and gauges for monitoring tank and outlet pressure.

Connecting Devices

To connect devices, ensure the compressor is turned off. Attach the air hose to the quick-connect coupler and connect the other end to your pneumatic tool.

Turn off the compressor before connecting or disconnecting hoses.
Ensure all connections are secure to prevent air leaks.

Tip: Use the appropriate fittings for your tools.

Operating the Compressor

To operate the compressor, follow these steps:

Turn on the compressor using the power switch.
Allow the tank to fill to the desired pressure.
Use the regulator to adjust the pressure for your tool.
Monitor the pressure gauges during operation.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance:

Check and tighten all connections regularly.
Drain the tank after each use to prevent moisture buildup.
Inspect the air filter and clean or replace as needed.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Follow these safety guidelines to ensure safe operation:

Read the manual thoroughly before use.
Wear appropriate personal protective equipment.
Keep the compressor away from flammable materials.
Do not exceed the maximum pressure rating.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
Low pressure	Air leaks	Inspect hoses and connections for leaks.
Excessive noise	Loose parts	Tighten any loose screws or components.
Tank won't fill	Faulty pressure switch	Replace the pressure switch if necessary.

Reset: Disconnect power and reconnect if issues persist.

Service: For assistance, contact Craftsman customer service.