Craftsman Air 919-167210 Compressor Manual

The Craftsman Air 919-167210 is a reliable and efficient air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick-connect coupler, and built-in pressure gauge.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various tasks.
150 PSI maximum pressure	Delivers high pressure for efficient operation.
Quick-connect coupler	Allows for easy attachment of air tools.
Built-in pressure gauge	Monitors air pressure for optimal performance.

Installation

Unpack the compressor and place it on a stable surface. Ensure adequate ventilation during operation.

Connect the air hose to the quick-connect coupler.
Plug the compressor into a grounded outlet.
Check the oil level (if applicable) and ensure the drain valve is closed.

WARNING! Ensure the compressor is on a flat surface to prevent tipping.

First-Time Setup

Power on the compressor and set the desired pressure using the pressure regulator.

Adjust the pressure to the required level for your application.
Test the compressor by running it briefly to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Compressor Type: Oil-free.
Weight: Approximately 40 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access controls on the front panel: power switch, pressure regulator, and pressure gauge.

Operation: Turn on the power switch, adjust the pressure regulator to the desired PSI, and connect your air tools.

Connecting Devices

Use the quick-connect coupler to attach air tools. Ensure the compressor is off before connecting or disconnecting tools.

Turn off the compressor before connecting tools.
Attach the air hose to the tool securely.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

To operate, turn on the compressor and allow it to build pressure. Monitor the pressure gauge during use.

Start the compressor and wait for it to reach the desired pressure.
Use your air tools as needed.
Turn off the compressor when finished.

WARNING! Do not operate in enclosed spaces without proper ventilation.

Maintenance and Care

Regular maintenance ensures optimal performance. Follow these guidelines:

Drain the tank after each use to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten screws and inspect components.
Tank won't fill	Faulty pressure switch	Replace pressure switch if necessary.

Reset: Unplug the compressor for 10 seconds and plug it back in.