Craftsman Air 919-165612 Compressor Manual

The Craftsman Air 919-165612 is a versatile air compressor designed for various applications including inflating tires, powering pneumatic tools, and more. This manual provides essential information regarding safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick-connect coupler, and built-in pressure gauge.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various tasks.
150 PSI maximum pressure	Delivers high pressure for efficient operation.
Quick-connect coupler	Allows for easy attachment of air hoses and tools.
Built-in pressure gauge	Monitors air pressure for optimal performance.

Installation

Unpack the compressor and place it on a stable surface. Ensure adequate ventilation during operation.

Connect the air hose to the quick-connect coupler.
Plug the compressor into a grounded electrical outlet.
Check that the pressure gauge is functioning correctly.
Ensure the drain valve is closed before starting.

WARNING! Always operate the compressor in a well-ventilated area to avoid overheating.

First-Time Setup

Before using the compressor for the first time, follow these steps:

Fill the tank with air by turning on the compressor.
Set the desired pressure using the pressure regulator.
Test the compressor with a small task to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating of 150 PSI.

Specifications

Model: Craftsman Air 919-165612
Tank Capacity: 6 gallons
Maximum Pressure: 150 PSI
Power Source: 120V AC
Weight: Approximately 40 lbs
Dimensions: 24 x 18 x 18 inches
Noise Level: 68 dB

Controls and Settings

The compressor features a pressure regulator, on/off switch, and pressure gauge for easy operation.

Pressure Regulator: Adjusts the output pressure to the desired level.

On/Off Switch: Powers the compressor on and off.

Pressure Gauge: Displays the current tank pressure.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Attach the air hose to the quick-connect coupler.
Connect the other end of the hose to the pneumatic tool.
Turn on the compressor and set the desired pressure.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

To operate the compressor, follow these steps:

Turn on the compressor using the on/off switch.
Allow the tank to fill to the set pressure.
Use the connected tool as needed.
Monitor the pressure gauge during operation.

WARNING! Do not operate the compressor in enclosed spaces.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	No power	Check power source and connections.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Compressor runs continuously	Faulty pressure switch	Replace pressure switch.
Excessive noise	Loose components	Tighten loose screws and bolts.

Service: For further assistance, contact customer support.