Craftsman Air 919-165580 Compressor Manual

The Craftsman Air 919-165580 is a powerful air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. It features a 6-gallon tank, a maximum pressure of 150 PSI, and a 2.6 SCFM at 90 PSI for efficient performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, easy-to-read pressure gauges, and a lightweight design for portability.

Feature	Description
6-Gallon Tank	Provides ample air storage for various tasks.
150 PSI Maximum Pressure	Delivers high pressure for efficient tool operation.
Oil-Free Pump	Requires less maintenance and provides clean air.
Easy-to-Read Gauges	Allows for quick monitoring of pressure levels.
Portable Design	Lightweight and easy to transport.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the compressor outlet.
Ensure the drain valve is closed before starting.
Plug the compressor into a grounded outlet.
Check all connections for leaks.

WARNING! Always ensure the compressor is turned off and unplugged before performing any maintenance.

First-Time Setup

Before using the compressor for the first time, follow these steps:

Fill the tank with air by turning on the compressor.
Set the desired pressure using the regulator.
Test the compressor with a small task to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
SCFM at 90 PSI: 2.6 SCFM.
Power Source: 120V AC.
Weight: Approximately 30 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

The compressor features a pressure regulator, on/off switch, and easy-to-read gauges for monitoring pressure levels.

Regulator: Adjusts the output pressure to the desired level.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

To connect devices, ensure the compressor is off and follow these steps:

Attach the air hose to the compressor outlet.
Connect the other end of the hose to the tool or device.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks before using connected devices.

Operating the Compressor

To operate the compressor:

Turn on the compressor using the on/off switch.
Allow the tank to fill to the set pressure.
Use the connected tool as needed.
Turn off the compressor when finished.

WARNING! Do not operate the compressor in enclosed spaces without proper ventilation.

Maintenance

Regular maintenance is essential for optimal performance:

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Always follow safety guidelines when operating the compressor:

Wear appropriate personal protective equipment.
Keep the compressor away from flammable materials.
Do not exceed the maximum pressure rating.

Regulatory Information

This compressor complies with applicable safety standards. For support, visit www.craftsman.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and bolts.
Tank does not fill	Faulty pressure switch	Replace pressure switch if necessary.

Service: For assistance, contact customer service at 1-800-4-Craftsman.