Craftsman Air 919-165520 Compressor Manual

The Craftsman Air 919-165520 is a reliable air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Troubleshooting

Features at a Glance

Key components: Portable design, oil-free pump, easy-to-read pressure gauge, quick-connect coupler, and safety relief valve.

Feature	Description
Portable Design	Lightweight and easy to transport
Oil-Free Pump	Requires no maintenance and provides clean air
Pressure Gauge	Easy-to-read gauge for monitoring pressure levels
Quick-Connect Coupler	Allows for fast and easy tool changes
Safety Relief Valve	Prevents over-pressurization for user safety

Installation

Unpack and inspect the compressor. Place it on a stable surface away from moisture.

Connect the air hose to the quick-connect coupler.
Ensure the compressor is plugged into a grounded outlet.
Check that the safety relief valve is functioning properly.

WARNING! Always ensure the compressor is off before making any connections.

First-Time Setup

Power on the compressor and set the desired pressure using the pressure regulator.

Adjust the pressure to the required level for your application.
Check for any air leaks before use.
Ensure all connections are secure.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Model: Craftsman Air 919-165520
Tank Capacity: 6 gallons
Max Pressure: 150 PSI
Power Source: 120V AC
Weight: 40 lbs
Noise Level: 68 dBA
Air Delivery: 2.6 CFM at 90 PSI

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Tip: Regularly check the pressure gauge to ensure optimal performance.

Connecting Devices

Ensure the compressor is off before connecting any tools.

Attach the air hose to the quick-connect coupler.
Connect your pneumatic tool to the other end of the air hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Use only compatible tools to avoid damage.

Operating the Compressor

To operate the compressor, turn on the power switch and adjust the pressure as needed for your application.

Monitor the pressure gauge during operation.
Turn off the compressor when not in use.

WARNING! Never leave the compressor unattended while in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
Low pressure	Leak in the system	Inspect hoses and connections for leaks.
Excessive noise	Worn parts	Inspect for damaged components and replace as necessary.
Compressor shuts off	Overheating	Allow to cool down before restarting.

Service: For assistance, contact Craftsman customer support.