Craftsman Air 919-165511 Compressor Manual

The Craftsman Air 919-165511 is a versatile air compressor designed for both professional and home use. It features a powerful motor, a large tank capacity, and various outlets for different tools. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 150 PSI maximum pressure, oil-free pump, and multiple outlet options.

Feature	Description
6-Gallon Tank	Provides ample air supply for various tools
150 PSI Maximum Pressure	Suitable for heavy-duty applications
Oil-Free Pump	Requires less maintenance and provides cleaner air
Multiple Outlets	Allows for simultaneous use of multiple tools
Portable Design	Easy to transport with built-in handle

Installation

Unpack the compressor and place it on a stable surface. Ensure adequate ventilation during operation.

Connect the air hose to the outlet.
Plug the compressor into a grounded outlet.
Check for any leaks before use.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and allow it to build pressure before using any tools.

Set the desired pressure using the regulator.
Check all connections for tightness.
Test the compressor with a small tool to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Weight: 30 lbs.
Dimensions: 24 x 18 x 18 inches.
Noise Level: 68 dB.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel.

Pressure Regulator: Adjusts the output pressure for different tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Ensure the compressor is off before connecting any tools.

Connect the air hose to the compressor outlet.
Attach the desired tool to the other end of the air hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Use quick-connect fittings for easy tool changes.

Operating the Compressor

Follow safety guidelines while operating the compressor.

Turn on the compressor and allow it to reach the set pressure.
Use tools as per their specifications.
Monitor the pressure gauge during operation.

WARNING! Do not operate the compressor in enclosed spaces without proper ventilation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Check and replace the air filter as needed.
Drain the tank regularly to prevent moisture buildup.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check outlet and power cord.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and fittings.
Overheating	Blocked vents	Ensure vents are clear and clean.

Reset: Unplug and plug back in to reset the compressor.