Craftsman Air 919-165382 Compressor Manual

The Craftsman Air 919-165382 is a reliable air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. It features a powerful motor, a durable tank, and easy-to-use controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, quick-connect air outlet, pressure gauge, and safety valve.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various tasks.
Quick-connect outlet	Allows for easy attachment of air hoses and tools.
Pressure gauge	Displays current tank pressure for monitoring.
Safety valve	Prevents over-pressurization of the tank.

Installation

Unpack and inspect the compressor. Place it on a stable surface away from moisture.

Connect the air hose: Attach the hose to the quick-connect outlet.
Check the power supply: Ensure the outlet is compatible with the compressor's voltage.
Plug in the compressor: Use a grounded outlet for safety.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and set the desired pressure using the regulator.

Set the pressure: Turn the regulator knob to adjust the output pressure.
Test the compressor: Run the compressor briefly to ensure proper operation.
Check for leaks: Inspect all connections for air leaks.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Tank Size: 6 gallons.
Max Pressure: 125 PSI.
Motor: 1.5 HP, 120V.
Weight: 40 lbs.
Dimensions: 24 x 16 x 18 inches.
Noise Level: 68 dBA.
Power Source: Electric.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel.

Pressure Regulator: Adjusts the output pressure for connected tools.

On/Off Switch: Powers the compressor on and off.

Connecting Devices

Connect air tools using the quick-connect outlet.

Turn off the compressor before connecting tools.
Ensure the tool is compatible with the compressor's pressure output.
Securely attach the air hose to the tool.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Follow these steps to operate the compressor safely.

Turn on the compressor using the on/off switch.
Set the desired pressure using the regulator.
Connect your air tool and begin operation.

WARNING! Do not exceed the maximum pressure for your tools.

Maintenance

Regular maintenance ensures optimal performance.

Drain the tank regularly to prevent rust.
Check and replace air filters as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor.

Always wear safety goggles when using air tools.
Do not operate in wet conditions.
Keep the compressor away from flammable materials.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check the outlet and power cord.
No air pressure	Leak in the system	Inspect hoses and connections for leaks.
Compressor runs continuously	Faulty pressure switch	Replace the pressure switch.
Excessive noise	Loose parts	Tighten all screws and bolts.

Service: For assistance, contact customer support at 1-800-4MY-HOME.