Craftsman Air 919-165380 Compressor Manual

The Craftsman Air 919-165380 is a powerful air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, quick connect coupler, and built-in pressure gauge.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Offers a good balance between portability and air supply.
150 PSI maximum pressure	Suitable for a variety of tasks.
Quick connect coupler	Allows for easy attachment of air hoses.
Built-in pressure gauge	Monitors air pressure for accurate operation.

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the quick connect coupler.
Ensure the drain valve is closed before starting.
Plug the compressor into a grounded outlet.

WARNING! Ensure the compressor is not placed near flammable materials.

First-Time Setup

Power on the compressor; check for any leaks.

Adjust the pressure regulator to the desired PSI.
Test the compressor by running it briefly.
Check all connections for tightness.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Compressor Type: Oil-free.
Weight: 40 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Tip: Always monitor the pressure gauge while operating.

Connecting Devices

Ensure the compressor is off before connecting any devices.

Attach the air hose to the quick connect coupler.
Connect your pneumatic tool to the other end of the air hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Use appropriate fittings for your tools.

Operating the Compressor

To operate, turn on the compressor and allow it to build pressure. Monitor the pressure gauge during use.

Use the compressor for your intended application.
Turn off the compressor when finished.
Release any remaining pressure before storing.

WARNING! Do not operate in enclosed spaces without proper ventilation.

Maintenance

Regular maintenance is essential for optimal performance.

Check the air filter regularly and clean or replace as needed.
Drain the tank after each use to prevent moisture buildup.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check outlet and power cord.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Compressor runs continuously	Faulty pressure switch	Replace the pressure switch.
Excessive noise	Loose parts	Tighten all screws and fittings.

Service: For further assistance, contact customer support.