Craftsman Air 919-165190 Compressor Manual

The Craftsman Air 919-165190 is a reliable air compressor designed for various tasks, including inflating tires, powering pneumatic tools, and more. It features a powerful motor, a durable tank, and easy-to-use controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 2.6 SCFM at 90 PSI, oil-free pump, easy-to-read pressure gauge, and quick connect air outlet.

Feature	Description
Oil-Free Pump	Requires no maintenance and provides clean air.
6-Gallon Tank	Provides ample air storage for various applications.
Pressure Gauge	Allows for easy monitoring of air pressure.
Quick Connect Outlet	Facilitates easy attachment of air tools.
Portable Design	Equipped with wheels for easy transport.

Installation

Unpack the compressor and place it on a stable surface. Ensure the area is well-ventilated.

Check the oil level (if applicable) and fill as necessary.
Connect the air hose to the quick connect outlet.
Plug the compressor into a grounded outlet.
Turn on the compressor and allow it to build pressure.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and follow the instructions for initial setup.

Set the desired pressure using the pressure regulator.
Check for any air leaks in the connections.
Test the compressor with a small air tool to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating of the compressor.

Specifications

Tank Size: 6 gallons.
Max Pressure: 150 PSI.
SCFM at 90 PSI: 2.6.
Power Source: 120V AC.
Weight: Approximately 40 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Tip: Always adjust the pressure before using any air tools.

Connecting Devices

Ensure the compressor is off before connecting any air tools.

Attach the air hose to the quick connect outlet.
Connect your air tool to the other end of the hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Use appropriate fittings for your air tools.

Operating the Compressor

To operate the compressor, turn on the power switch and allow it to build pressure. Use the pressure regulator to set the desired output pressure.

Monitor the pressure gauge during operation.
Turn off the compressor when not in use.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Check the air filter regularly and clean or replace as needed.
Inspect hoses and connections for wear or damage.
Drain the tank regularly to prevent moisture buildup.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Wear appropriate personal protective equipment.

WARNING! Keep the compressor away from flammable materials.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
No air pressure	Leak in hose	Inspect and replace damaged hose.
Excessive noise	Loose parts	Tighten all screws and bolts.
Pressure gauge not working	Faulty gauge	Replace the pressure gauge.

Reset: Unplug the compressor and plug it back in to reset.