Craftsman Air 919-162080 Compressor Manual

The Craftsman Air 919-162080 is a reliable air compressor designed for various applications, including inflating tires, powering pneumatic tools, and more. It features a robust motor, a durable tank, and easy-to-use controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 2.6 SCFM at 90 PSI, oil-free pump, easy-to-read pressure gauge, and quick-connect coupler.

Feature	Description
6-Gallon Tank	Provides ample air supply for various tasks
Oil-Free Pump	Requires no maintenance and reduces the risk of oil contamination
Pressure Gauge	Allows for easy monitoring of air pressure
Quick-Connect Coupler	Facilitates easy attachment of air hoses and tools
Portable Design	Equipped with wheels for easy transport

Installation

Unpack the compressor and place it on a stable surface. Ensure adequate ventilation during operation.

Connect the air hose: Attach the hose to the quick-connect coupler.
Plug into a power outlet: Ensure the outlet matches the compressor's voltage requirements.
Check for leaks: Turn on the compressor and inspect for any air leaks.

WARNING! Always use the compressor in a well-ventilated area to avoid carbon monoxide buildup.

First-Time Setup

Power on the compressor and allow it to build pressure before use.

Set the desired pressure: Adjust the regulator to the required PSI for your application.
Test the compressor: Use a tire or tool to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating of the compressor.

Specifications

Tank Size: 6 gallons.
Max Pressure: 125 PSI.
SCFM at 90 PSI: 2.6.
Power Source: 120V AC.
Weight: Approximately 40 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Connecting Devices

Ensure the compressor is off before connecting any tools or hoses.

Attach the air hose to the quick-connect coupler.
Connect the other end of the hose to your pneumatic tool.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

To operate the compressor, follow these steps:

Turn on the compressor using the on/off switch.
Allow the compressor to build pressure to the set level.
Use your pneumatic tools as needed.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Check the air filter regularly and clean or replace as needed.
Drain the tank after each use to prevent moisture buildup.
Inspect hoses and connections for wear and tear.

Safety Information

Always follow safety guidelines when operating the compressor.

Wear appropriate personal protective equipment.
Keep the compressor away from flammable materials.
Do not exceed the maximum pressure rating.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Noisy operation	Loose parts	Tighten any loose screws or components.
Overheating	Blocked air intake	Ensure air intake is clear of obstructions.

Service: For further assistance, contact customer support.