Craftsman Air 919-152160 Compressor Manual

The Craftsman Air 919-152160 is a reliable air compressor designed for various tasks, including inflating tires, powering pneumatic tools, and more. It features a powerful motor, a durable tank, and easy-to-use controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 2.6 SCFM at 90 PSI, oil-free pump, quick-connect coupler, and pressure gauge.

Feature	Description
6-gallon tank	Provides ample air storage for various tasks
Oil-free pump	Requires less maintenance and is easier to use
Quick-connect coupler	Allows for easy attachment of air tools
Pressure gauge	Monitors air pressure for optimal performance
Portable design	Easy to transport with a handle and wheels

Installation

Unpack the compressor and place it on a stable surface. Ensure adequate ventilation during operation.

Connect the air hose to the quick-connect coupler.
Plug the compressor into a grounded outlet.
Check the oil level (if applicable) and ensure the drain valve is closed.
Turn on the compressor and allow it to build pressure.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor; follow the instructions for initial setup.

Set the desired pressure using the regulator knob.
Connect your air tool to the quick-connect coupler.
Test the compressor by activating the air tool.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Tank Size: 6 gallons.
Max Pressure: 125 PSI.
Air Delivery: 2.6 SCFM at 90 PSI.
Power Source: 120V AC.
Weight: Approximately 40 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Safety Features: Automatic shut-off at maximum pressure, thermal overload protection.

Connecting Devices

Ensure the compressor is off before connecting any air tools.

Attach the air hose to the quick-connect coupler.
Connect your air tool to the other end of the hose.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks before using your air tools.

Operating the Compressor

To operate, simply turn on the compressor and allow it to build pressure. Use the regulator to adjust the output pressure for your tools.

Monitor the pressure gauge during operation.
Turn off the compressor when not in use.

WARNING! Do not operate the compressor in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Keep the compressor away from flammable materials and ensure proper ventilation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten screws and check for loose components.
Compressor cycles frequently	Tank not holding pressure	Check for leaks and repair as necessary.

Reset: Unplug the compressor for a few minutes and then plug it back in.

Service: For assistance, contact customer support at 1-800-4-MY-HOME.