Craftsman Air 226-165290 Compressor Manual

The Craftsman Air 226-165290 is a powerful air compressor designed for a variety of tasks, including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: 26-gallon tank, 165 PSI maximum pressure, oil-free pump, and dual quick couplers for easy tool connection.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
165 PSI maximum pressure	Suitable for a wide range of applications.
Dual quick couplers	Allows for two tools to be used simultaneously.
Pressure gauge	Displays current tank pressure for monitoring.
Safety valve	Prevents over-pressurization of the tank.

Installation

Unpack the compressor and place it on a stable surface. Ensure proper ventilation during operation.

Connect the air hose to the quick coupler.
Plug the compressor into a grounded outlet.
Check for any leaks before use.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and set the desired pressure using the regulator.

Adjust the pressure to the required level for your tool.
Test the compressor by running it briefly to ensure proper operation.

CAUTION! Always wear safety goggles when operating the compressor.

Specifications

Tank Size: 26 gallons.
Maximum Pressure: 165 PSI.
Power Source: 120V AC.
Compressor Type: Oil-free.
Weight: 80 lbs.
Dimensions: 30 x 20 x 20 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge indicates the current tank pressure.

Tip: Always check the pressure gauge before using any pneumatic tools.

Connecting Devices

Connect your pneumatic tools using the quick couplers. Ensure the compressor is off before making connections.

Turn off the compressor before connecting tools.
Match the tool's connector to the quick coupler.
Turn on the compressor and adjust the pressure as needed.

Tip: Use only compatible tools to avoid damage.

Operating the Compressor

To operate the compressor, turn on the power switch and adjust the pressure to your desired level.

Start the compressor by flipping the power switch.
Adjust the pressure regulator to the required PSI for your tool.
Monitor the pressure gauge during operation.

WARNING! Do not exceed the maximum pressure rating.

Maintenance and Care

Regular maintenance is essential for optimal performance. Check the air filter and drain the tank regularly.

Inspect the air filter monthly and clean or replace as necessary.
Drain the tank after each use to prevent moisture buildup.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect hose for leaks and replace if necessary.
Excessive noise	Loose components	Tighten any loose screws or bolts.
Tank won't fill	Faulty pressure switch	Replace the pressure switch if defective.

Service: For further assistance, contact customer support at 1-800-4-CRAFTSMAN.