Craftsman Air 107-16957 Compressor Manual

The Craftsman Air 107-16957 is a reliable air compressor designed for various tasks including inflating tires, powering pneumatic tools, and more. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Oil-free pump, 6-gallon tank, 150 PSI maximum pressure, easy-to-read pressure gauges, and a lightweight design for portability.

Feature	Description
Oil-free pump	Requires no maintenance and provides clean air.
6-gallon tank	Provides ample air storage for various applications.
150 PSI maximum pressure	Delivers high pressure for efficient operation.
Easy-to-read gauges	Allows for quick monitoring of pressure levels.
Portable design	Lightweight and equipped with a handle for easy transport.

Installation

Unpack and inspect the compressor. Place it on a stable surface in a well-ventilated area.

Connect the air hose: Ensure the compressor is off and connect the hose securely.
Plug into a grounded outlet: Use a power source that matches the compressor's voltage.
Check for leaks: Before use, inspect all connections for air leaks.

WARNING! Ensure the compressor is placed away from flammable materials.

First-Time Setup

Power on the compressor and allow it to build pressure before use.

Set the pressure regulator: Adjust to the desired PSI for your application.
Test the compressor: Run it briefly to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Tank Size: 6 gallons.
Maximum Pressure: 150 PSI.
Power Source: 120V AC.
Compressor Type: Oil-free.
Weight: Approximately 30 lbs.
Dimensions: 24 x 18 x 18 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. Ensure the compressor is off before making adjustments.

Connecting Devices

Connect pneumatic tools or hoses to the air outlet. Ensure all connections are secure.

Turn off the compressor before connecting devices.
Match the tool's air inlet to the hose fitting.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

To operate, turn on the compressor and allow it to build pressure. Use the regulator to adjust the output pressure as needed.

Maintenance and Care

Regularly check for air leaks and inspect the power cord. Drain the tank after each use to prevent moisture buildup.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check outlet and power cord.
No pressure	Leak in hose	Inspect and replace hose if necessary.
Excessive noise	Loose components	Tighten all screws and fittings.
Pressure drops	Leak in system	Check connections for leaks.

Service: For further assistance, contact customer support.